OK Autrod 13.23

ESAB

OK Autrod 13.23

The following items have been added to your list


x

OK Autrod 13.23 is a 0.9 Ni-alloyed (ER80S-Ni1), copper-coated, solid wire for the GMAW of low-temperature, fine-grained steels. The wire provides good impact toughness down to -50°C and is especially suitable for use in the offshore industry.


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
as welded aws 80ar/20co2
70 J (52 ft-lb) -46 degC (-51 degF)
20 J (15 ft-lb) -60 degC (-76 degF)
130 J (96 ft-lb) 0 degC (32 degF)
150 J (111 ft-lb) 20 degC (68 degF)

Typical Tensile Properties

ConditionElongationShielding GasTensile Strength Yield Strength
As Welded30 %AWS 80Ar/20CO2 560 MPa (81 ksi)480 MPa (70 ksi)

Deposition Data

Current Deposition Rate Diameter Voltage Wire Feed Speed
80-280 A 1.0-5.4 kg/h (2-11 lb/h) 1.0 mm (0.040 in.) 18-28 V 2.7-14.7 m/min (106-579 in./min)
120-350 A 1.5-6.6 kg/h (3-14 lb/h) 1.2 mm (0.047 in.) 20-33 V 2.7-12.4 m/min (106-488 in./min)
40-170 A 0.4-2.6 kg/h (0-5 lb/h) 0.8 mm (0.030 in.) 16-22 V 2.0-10.8 m/min (79-425 in./min)

Classifications

2
Grade ER80S-Ni1
Name SFA/AWS A5.28

Approvals

Approvals BV SA4Y40M
NAKS/HAKC 1.0MM
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Low alloyed (1 % Ni)

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Cu Mn Mo Ni P S Si V
0.07 % 0.07 % - 1.11 % 0.29 % 0.9 % - - 0.57 % -
Typical Weld Metal Analysis %
Ar/1-5%O2 (M13)
0.08 % 0.01 % 0.15 % 1.0 % 0.25 % 0.9 % 0.01 % 0.01 % 0.7 % 0.01 %
x

How to purchase OK Autrod 13.23

We are as eager to put ESAB product in your hands as you are to have them. That is why we sell our products through distributors who will give you the attention, support, and value you deserve. Their expertise will make sure you are happy with the purchasing process.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +65 6318 2608. You can also email us at machines@esabasia.com or consumables@esabasia.com and we will point you in the right direction.

x

x

Loading..