Exaton 19.12.3.L

Exaton

Exaton 19.12.3.L

The following items have been added to your list


x

19.12.3.L is used for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo-types, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, used for service temperatures up to 400°C (750°F). It is also used for Cr steels with max. 19% Cr.It is used for TIG-welding.


Typical Charpy V-Notch Properties

as welded

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded39 %610 MPa (88 ksi)500 MPa (73 ksi)

Classifications

Wire Electrode SFA/AWS A5.9 : ER316L
EN ISO 14343-A : W 19 12 3 L
Werkstoffnummer : 1.4430

Approvals

Approvals CE EN 13479
DNV-GL VL 316L
VdTÜV 00066
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Austenitic (with appr. 8 % ferrite) 19 % Cr - 12 % Ni - 3 % Mo - Low C
Shielding Gas I1 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Cu FN WRC-92 Mn Mo N Nb Ni P S Si
0.015 % 18.5 % 0.1 % 9 % 1.7 % 2.6 % 0.04 % 0.02 % 12 % <0.025 % 0.015 % 0.4 %
Typical Weld Metal Analysis %
<0.02 % 18 % 0.1 % 7 % 1.7 % 2.5 % 0.05 % 0.01 % 12 % <0.03 % <0.02 % 0.4 %
x

How to purchase Exaton 19.12.3.L

We are as eager to put ESAB product in your hands as you are to have them. That is why we sell our products through distributors who will give you the attention, support, and value you deserve. Their expertise will make sure you are happy with the purchasing process.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +65 6318 2608. You can also email us at machines@esabasia.com or consumables@esabasia.com and we will point you in the right direction.

x

x

Loading..