Stoody ThermaClad 105B
ThermaClad 105B deposit has very good resistance to metal-to-metal-wear. The deposits are readily machinable with carbide tools. Multiple layer, crack-free deposits can be obtained. When more than four layers are required, an underbase of ThermaClad 104 is recommended. Deposits are difficult to flame cut.
Typical Tensile Properties
|Current||Deposition Type||Diameter||TTW Dist.||Voltage|
|350-400 A||Full Range||3.2 mm (1/8 in.)||25-38 mm (1-1 1/2 in.)||28-30 V|
|350-400 A||Subarc||3.2 mm (1/8 in.)|
Typical Weld Metal Analysis %
|0.5 %||3.5 %||BAL %||4.5 %|
How to purchase Stoody ThermaClad 105BWe are as eager to put ESAB product in your hands as you are to have them. That is why we sell our products through distributors who will give you the attention, support, and value you deserve. Their expertise will make sure you are happy with the purchasing process.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +65 6318 2608. You can also email us at firstname.lastname@example.org or email@example.com and we will point you in the right direction.