OK Tigrod 309L
Bare corrosion resisting chromium-nickel welding rod for welding of similar steels of 24% Cr, 13% Ni types. The alloy is also used for welding of buffer layers on CMn steels and welding of dissimilar joints. When using the wire for buffer layers and dissimilar joints it is necessary to control the dilution of the weld. OK Tigrod 309L has a good general corrosion resistance. When used for joining dissimilar materials the corrosion resistance is of secondary importance.
Typical Charpy V-Notch Properties
|Impact Value||Testing Temperature|
|90 J (67 ft-lb)||-110 degC (-166 degF)|
|130 J (96 ft-lb)||-60 degC (-76 degF)|
|160 J (118 ft-lb)||20 degC (68 degF)|
Typical Tensile Properties
|Condition||Elongation||Tensile Strength||Yield Strength|
|As Welded||40 %||590 MPa (86 ksi)||430 MPa (62 ksi)|
Werkstoffnummer : ~1.4332
SFA/AWS A5.9 : ER309L
EN ISO 14343-A : W 23 12 L
CE EN 13479
NAKS/HAKC 1.6-2.4 mm
|Approvals are based on factory location. Please contact ESAB for more information.|
|Alloy Type||Austenitic (with approx. 10 % ferrite) 24 % Cr - 13 % Ni - Low C|
Typical Weld Metal Analysis %
|Typical Wire Composition %|
|0.02 %||23.2 %||-||10 %||1.8 %||0.10 %||0.05 %||13.4 %||-||-||0.4 %|
|Typical Weld Metal Analysis %|
|0.015 %||24.0 %||0.1 %||-||1.7 %||0.1 %||-||13.0 %||0.020 %||0.015 %||0.4 %|
How to purchase OK Tigrod 309LWe are as eager to put ESAB product in your hands as you are to have them. That is why we sell our products through distributors who will give you the attention, support, and value you deserve. Their expertise will make sure you are happy with the purchasing process.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +65 6318 2608. You can also email us at email@example.com or firstname.lastname@example.org and we will point you in the right direction.